Mesh stainless steel wire mesh manufacturer of all kinds of stainless steel wire mesh

Product Catalog For more information

Your enquiry:

Home << Wire Mesh << Stainless Steel Wire Mesh

Stainless Steel: Stainless steel is selected for their wear-resisting, heat-resisting, acid-resisting and corrosion resisting characteristics. Many different grades of stainless are used in wire cloth.T304 is the most common, but other are used in specific applications to take advantage of each grade’s unique properties. The wire mesh made of stainless steel is extensively used in mining, chemical industry, food industry and pharmaceutical industry.
Our stainless steel wire mesh products are generally made of stainless steel Type 302, 304, 304L, 316, 316L, 321 and 430 etc. We produce wire cloth in all kinds of forms. The weaving is determined according to our customers’ specific requirements, such as the material, the wire diameter, the size of the mesh, width and length.
Weaving Types: Plain Weave Twill Weave Plain Dutch Weave Dutch Twill Weave Reverse Dutch Weave

Plain Weave

Plain Weave Wire Cloth is the most commonly used and simplest wire cloth weave. Each shute wire is woven alternately over and under the warp wires through the cloth at 90 degree angles. Warp and weft wires are normally of the same diameter. This is a very common weave that can be produced quickly and economically . Used for the majority of commercial applications and for filtration where a high flow rate is required.
Go to top

Specification list of Stainless Steel Wire Mesh / Woven Wire Cloth
Mesh/Inch	Wire Diameter		Aperture		Open Area, %
Mesh/Inch	Inches	mm	Inches	mm	Open Area, %
1	0.135	3.5	0.865	21.97	74.8
1	0.120	3.0	0.880	22.35	77.4
1	0.105	2.5	0.895	22.73	80.1
1	0.080	2.0	0.920	23.36	84.6
3/4"	0.120	3.0	0.630	16.00	70.5
3/4"	0.080	2.0	0.670	17.01	79.8
2 x 2	0.120	3.0	0.380	9.65	57.8
2 x 2	0.105	2.5	0.395	10.03	62.4
2 x 2	0.080	2.0	0.420	10.66	70.6
2 x 2	0.063	1.6	0.437	11.10	76.4
2 x 2	0.047	1.2	0.453	11.50	82.1
3 x 3	0.080	2.0	0.253	6.42	57.6
3 x 3	0.063	1.6	0.270	6.85	65.6
3 x 3	0.047	1.2	0.286	7.26	73.6
4 x 4	0.080	2.0	0.170	4.31	46.2
4 x 4	0.063	1.6	0.187	4.75	56.0
4 x 4	0.047	1.2	0.203	5.15	65.9
5 x 5	0.047	1.2	0.153	3.88	58.5
5 x 5	0.041	1.0	0.159	4.01	63.2
6 x 6	0.063	1.6	0.104	2.64	38.9
6 x 6	0.047	1.2	0.120	3.04	51.8
6 x 6	0.035	0.9	0.132	3.35	62.7
8 x 8	0.063	1.6	0.062	1.57	24.6
8 x 8	0.047	1.2	0.078	1.98	38.9
8 x 8	0.035	0.9	0.090	2.28	51.8
8 x 8	0.032	0.8	0.093	2.36	55.4
8 x 8	0.028	0.7	0.097	2.46	60.2
10 x 10	0.047	1.2	0.053	1.34	28.1
10 x 10	0.035	0.9	0.065	1.65	42.3
10 x 10	0.032	0.8	0.068	1.27	46.2
10 x 10	0.025	0.63	0.075	1.90	56.3
12 x 12	0.041	1.0	0.042	1.06	25.4
12 x 12	0.035	0.9	0.048	1.22	33.2
12 x 12	0.032	0.8	0.051	1.29	37.5
12 x 12	0.028	0.7	0.055	1.39	43.6
12 x 12	0.023	0.58	0.060	1.52	51.8
14 x 14	0.032	0.8	0.039	1.52	29.8
14 x 14	0.025	0.63	0.046	0.99	41.5
14 x 14	0.023	0.58	0.048	1.22	45.2
14 x 14	0.020	0.5	0.051	1.30	51.0
16 x 16	0.028	0.7	0.035	0.89	30.5
16 x 16	0.023	0.58	0.040	1.01	39.9
16 x 16	0.018	0.45	0.045	1.14	50.7
18 x 18	0.020	0.5	0.036	0.91	41.1
18 x 18	0.018	0.45	0.038	0.96	48.3
20 x 20	0.023	0.58	0.027	0.68	29.2
20 x 20	0.020	0.5	0.030	0.76	36.0
20 x 20	0.018	0.45	0.032	0.81	41.0
20 x 20	0.016	0.40	0.034	0.86	46.2
24 x 24	0.014	0.35	0.028	0.71	44.2
28 x 28	0.010	0.25	0.026	0.66	51.8
30 x 30	0.013	0.33	0.020	0.50	37.1
30 x 30	0.012	0.30	0.021	0.53	40.8
35 x 35	0.012	0.30	0.017'	0.43	33.8
35 x 35	0.010	0.25	0.019	0.48	42.4
40 x 40	0.014	0.35	0.011	0.28	19.3
40 x 40	0.012	0.30	0.013	0.33	27.4
40 x 40	0.010	0.25	0.015	0.38	36.0
40 x 40	0.0095	0.24	0.016	0.40	38.4
50 x 50	0.009	0.23	0.011	0.28	30.3
60 x 60	0.0075	0.19	0.009	0.22	30.5
70 x 70	0.0065	0.17	0.008	0.20	29.8
80 x 80	0.0070	0.18	0.006	0.15	19.4
80 x 80	0.0055	0.14	0.007	0.17	31.4
90 x 90	0.0055	0.14	0.006	0.15	25.4
100 x 100	0.0045	0.11	0.006	0.15	30.3
120 x 120	0.0040	0.10	0.0043	0.11	26.6
120 x 120	0.0037	0.09	0.005	0.12	30.7
150 x 150	0.0026	0.066	0.0041	0.10	37.4
165 x 165	0.0019	0.048	0.0041	0.10	44.0
180 x 180	0.0023	0.058	0.0032	0.08	33.5
180 x 180	0.0020	0.050	0.0035	0.09	41.1
200 x 200	0.0020	0.050	0.003	0.076	36.0
200 x 200	0.0016	0.040	0.0035	0.089	46.0
220 x 220	0.0019	0.048	0.0026	0.066	33.0
230 x 230	0.0014	0.035	0.0028	0.071	46.0
250 x 250	0.0016	0.040	0.0024	0.061	36.0
270 x 270	0.0014	0.040	0.0022	0.055	38.0
300 x 300	0.0012	0.030	0.0021	0.053	40.1
325 x 325	0.0014	0.040	0.0017	0.043	30.0
325 x 325	0.0011	0.028	0.0020	0.050	42.0
400 x 400	0.0010	0.025	0.0015	0.038	36.0
500 x 500	0.0010	0.025	0.0011	0.028	25.0
635 x 635	0.0009	0.022	0.0006	0.015	14.5

Twill Weave

Twilled Weave Wire Cloth is woven by passing each shute wire alternately over and under two warp wires. This type of weave is commercially woven in items ranging from 150-635 mesh however it is also available in course and mid range mesh combinations.
Go to top

Mesh	Wire Dia. (mm)	Opening (mm)	Material (AISI)
250mesh wire	dia.0.040mm	0.063	304 or 316
300mesh wire	dia.0.040mm	0.044	304 or 316
325mesh wire	dia.0.035mm	0.043	304 or 316
350mesh wire	dia.0.030mm	0.042	304 or 316
400mesh wire	dia.0.030mm	0.033	304 or 316

Plain Dutch Weave

Dutch Weave Wire Cloth is woven with a larger wire diameter in the warp direction and a relatively smaller wire in the shute direction. The weft wires are woven tightly together producing a strong cloth whilst allowing a good flow rate. This weave has great strength and is available in wide range of micron ranges. It is primarily used to filter a wide range of liquid and slurry products.
Go to top

Wire Mesh Plain Dutch Weave
Gauge	Mesh	Wire Diameter	Reference values of particles passed
40	10x64	0.55x0.42	260
50	12x75	0.45x0.35	220
80	24x110	0.35x0.25	160
100	25x140	0.28x0.20	100
120	30x150	0.25x0.18	80
140	35x180	0.20x0.16	70
160	40x200	0.18x0.13	60
180	45x220	0.16x0.12	56
200	50x25	0 0.15x0.11	50
240	60x300	0.14x0.09	45
260	65x320	0.13x0.08	36
280	70x400	0.125x0.07	34
300	80x700	0.11x0.039	32

Dutch Twill Weave

Twilled Dutch Weave Wire Cloth is similar to Plain Dutch Weave, but effectively has a double layer of weft wires woven in twill pattern. Shute wires are passed alternately over and under two warp wires forming a fine mesh. This cloth is "light tight", has a very smooth surface, is strong, but has a restricted flow rate. Also referred to as Micromesh and is used for critical filtration applications often under high pressure. So it is capable of very fine filtration. It has a wide range of filtration applications for gas and liquid applications.
Go to top

Wire Mesh Twilled Dutch Weave
Gauge	Mesh	Wire Diameter	Reference values of particles passed
80II	20x250	0.28x0.2	38
120II	30x300	0.25x0.18	36
200II	50x500	0.14x0.11	34
320I	80x700	0.11x0.08	32
320II	80x780	0.10x0.07	30
360	90x780	0.10x0.07	25
400I	100x780	0.10x0.07	22
400II	100x900	0.10x0.063	20
500	120x1100	0.07x0.05	17
630	150x1400	0.063x0.04	16
650	180x1800	0.07x0.04	14
685	165x1400	0.063x0.032	13
795I	200x1400	0.07x0.04	12
795II	200x1800	0.05x0.032	10
850	2l0x1900	0.045x0.03	10
1000	250x2000	0.045x0.028	8
1125	280x2200	0.036x0.026	7
1225	300x2200	0.036x0.026	6
1280	325x2300	0.035x0.025	5
1600	400x2800	0.03x0.018	3

Reverse Dutch Weave

Reverse Dutch Weave Wire Cloth is a very strong woven product. Normally woven as a plain weave, but in reverse manner to Plain Dutch Weave the weft wires are of greater diameter than the warp wires, and consequently the warp mesh count is greater than the weft mesh count. This cloth is extremely strong, is easily cleaned and has a high flow rate. Also known as robusta. This mesh is ideal for making filter belts, and applications where fine filtration and great strength are required. This mesh is also made in reverse twill dutch and sometimes referred to as PZ and KPZ Mesh.
Go to top

Reverse Dutch Weave Wire Cloth Specification
Mesh Count Warp x Weft	Wire Dia mm Warp x Weft	Wire Dia inch Warp x Weft	Open Area %	Micron Rating
63 x 18	0.4000 x 0.6000	0.0157 x 0.0236	60	220
107 x 20	0.2400 x 0.6000	0.0094 x 0.0236	58	210
170 x 40	0.2000 x 0.4500	0.0079 x 0.0177	58	130
132 x 32	0.2000 x 0.4000	0.0079 x 0.0157	55	105
171 x 46	0.1500 x 0.3000	0.0059 x 0.0118	54	85
290 x 75	0.0900 x 0.2000	0.0035 x 0.0079	53	55
615 x 102	0.0400 x 0.1600	0.0157 x 0.0063	41	42
615 x 130	0.0400 x 0.1300	0.0157 x 0.0051	49	22
720 x 150	0.0360 x 0.1000	0.0014 x 0.0039	54	17